Operation instruction
1, pull up the manual brake, the clutch is placed in neutral, check the starter switch, should be in OFF gear.
2. The emergency starter should be placed on a stable ground or non-mobile platform, away from the engine and belt.
3. Connect the red positive clip (+) of the "emergency starter" to the positive terminal of the battery that lacks power. And make sure the connection is strong.
4. Connect the black auxiliary clip (-) of the "emergency starter" to the grounding column of the car, and ensure that the connection is firm.
5. Check the correctness and firmness of the connection.
6, start the car (no more than 5 seconds), if a start is not successful, please interval more than 5 seconds.
7. Remove the negative clamp from the grounding column after success.
8. Remove the red positive clip of the "emergency starter" (commonly known as "Crossing the River Dragon") from the positive electrode of the battery.
9, after use, please charge until the charging light is turned off.


Attention:
When starting the car, try to ensure that the power is fully charged (at least to the third indicator light, the power indicator light is only 1 light, please do not ignite).
The positive and negative electrode connection leads to the burning of the power supply, the customer bears the consequences!!!